|
Multi-Color Forensic Rod Kit
These durable brightly colored fiberglass rods 45.7cm x .64cm (18" x 1/4") are an inexpensive alternative to steel trajectory rods. The ends of each rod are solid, so they can be used as penetration rods in the deceased. Rods can be centered in larger holes with a set of Spacer Cones (not included). The bright coloring won’t fade when cleaned. Each kit contains 12 rods (four pink, four green, four orange) and includes 9 plastic connectors and a storage tube.
Durable
Economical
Can be used as penetration rods
Bright coloring won’t fade when cleaned
fiberglass rods, 18" rods, multi-colored forensic rods, photographic fog, multi-color forensic rods, forensic rods, 1007386, MCR-K, MCR-1, 1007384, 1007393, MR-00C, 4-0748-K, 4-0748-1, 4-0748-00C, 4-0748
|
0.00 |
|
|
Laser Trajectory Kit
Over long distances, trajectory strings and rods can sag, providing inaccurate results. For this reason, a laser is ideal for long distance trajectory reconstructions. This Laser Trajectory Kit includes either a red (BP-1) or green (BP-2) Laser Trajectory Pointer. Designed to be used in conjunction with or in place of trajectory rods. The kit includes four co-aligned steel trajectory rods suitable for use on holes produced by .32 caliber weapons and up. Rods and lasers may be connected in succession, using the included stainless steel connectors.
Both the steel rods and Laser Trajectory Pointer are co-aligned, always producing a straight, accurate line
Included Evi-Paq® Tripod Mount allows trajectory lasers and rods to be placed in open space and aimed at and through a bullet hole
Lasers and rods can be attached to any of the four sides of the Tripod Mount to help determine both the source and destination
Tripod Mount eliminates the need to have someone hold the laser
Included Angle Finder can be attached to a trajectory rod or tripod mount with Adhesive Wax to measure exact angles
Set of four Spacer Cones and O-rings are included to center the rods within each bullet hole and keep rods from slipping
bullet probe, trajectory rod, fiberglass rods, trajectory kit accessories, multi-colored forensic rods, photographic fog, Bullet probe, ltrk, BP-1, BP-2, 1007376, 1007377, ltrk-1, LTRK-2, Laser trajectory kit, 4-0740-cs, 4-0740-g, 4-0740-R, 4-0740cs, 4-0740g, 4-0740R, trajectory kit carry bag
|
179.50 |
|
|
Trajectory Kit Accessories
4-0747-TM1 - Trajectory Tripod Mount PR-TM1 - Aluminum Tripod Mount 2 x 3 x 3/8
4-0747-00C - Stainless Steel Connector PR-00C - Allows you to connect two protrusion rods together or to a Tri-pod Mount.
4-0747-AF1 - Angle Finder AF-1 - For Use In Trajectory Reconstruction
4-0747-00E - Tapered Trajectory Rod End PR-00E, Aluminum, 2" - Tapered Tip End Piece can be attached to the end of the protrusion rod allowing the user to push through a damaged or difficult hole.
4-0747-0CE - Slotted Patch Holder (ACC10) allows for string projection from the protrusion rods.
4-0747-0CS - Stainless Steel Connector PR-0CS - Stainless Steel Connector allows you to connect two .48cm (3/16") protrusion rods, forensic rods or a laser and rod together.
4-0747-SK1 - Spacer Cone Kit 4-Pack for use with Trajectory Kits PR-SK1
trajectory rod, fiberglass rods, 48" rods, trajectory kit accessories, multi-colored forensic rods, photographic fog, TR48-OR-K, TR48-YL-K, TR48-OR, TR48-YL, RODBAG-SM, 4-0746-O, 4-0746-Y, 4-0746-RO, 4-0746-RY, 4-0746-RSB, 1007806, PR-TM1, PR-00C, 1007784, 4-0747-TM1, 4-0747-00C, AF-1, 4-0747-AF1, 1006373, 1007784, 1007785, 4-0474-00E, PR-00E, 1007785, 4-0747-0CE, PR-0CE, 1007790, PR-0CS, 4-0747-0CS, 1007791, 1161609, 4-0747-SK1, ACC10
|
0.00 |
|
|
48" Fiberglass Trajectory Rods, Set of 10
These multi-colored trajectory rods are a convenient and inexpensive way to mark the trajectory of rounds through a wide variety of materials. These lightweight fiberglass rods work especially well when documenting trajectories in cars and large pieces of furniture.
Long length eliminates connectors that could affect trajectory path accuracy
Multi-colored rods make it easy to identify multiple bullet paths (available in high visibility orange and yellow only)
Pointed tip makes it easy to insert rods into evidence
Solid fiberglass construction provide exceptional or strength and durability
Rods accommodate all standard trajectory kit accessories
Rods store neatly in included durable black nylon carry bag
4-0746, bullet probe, trajectory rod, fiberglass rods, 48" rods, trajectory kit accessories, multi-colored forensic rods, photographic fog, TR48-OR-K, TR48-YL-K, TR48-OR, TR48-YL, RODBAG-SM, 4-0746-O, 4-0746-Y, 4-0746-RO, 4-0746-RY, 4-0746-RSB, Bullet probe
|
54.50 |
|
|
Dual Trajectory Laser Holder
Designed by Rob Caunt of the Firearms Section of the VancoUVer, British Columbia Police Department, the Dual Trajectory Laser Holder is used to hold two trajectory lasers in opposing directions with a high level of accuracy for gunshot trajectory reconstruction. Lasers not included.
The Dual Laser Holder easily mounts on a standard tripod
Can utilize either the Evi-Paq BP-1 or BP-2 laser trajectory pointers
The mount can also hold a single laser and an Evi-Paq Angle Finder
bullet probe, trajectory rod, fiberglass rods, trajectory kit accessories, multi-colored forensic rods, photographic fog, DLSR-1, 1006572
|
36.00 |
|
|
Laser Trajectory Pointer
The EVI-PAQ® BP-2 Laser Trajectory Pointer is a unique Class IIIa 5mw laser designed specifically for trajectory investigations and the green laser beam is more visible to the eye (and camera), so it is preferred in brighter conditions.. Crafted to work in conjunction with our trajectory and protrusion rods and tripod mount, it can be used to quickly and accurately determine the source and trajectory of bullets at a crime scene. It is co-aligned with its aluminum case, meaning that the laser won’t “wobble” when it is rotated. The BP-2’s innovative design places the on/off switch internal to the unit. Rather than use an external button which could be prone to breakage or failure, it is activated when a steel connector such as a trajectory rod is screwed into place at its base. The laser is powered by two AA batteries (included).
Co-aligned for consistent accuracy when conducting trajectory reconstructions
Green laser beam
Crafted to work with our trajectory and protrusion rods and tripod mount
bullet probe, trajectory rod, fiberglass rods, trajectory kit accessories, multi-colored forensic rods, photographic fog, 1006496, BP-2,
|
459.00 |
|
|
Laser Trajectory Pointer
The EVI-PAQ® BP-1 Laser Trajectory Pointer is a unique Class IIIa 5mw laser designed specifically for trajectory investigations and the Red laser beam
is preferred in low light conditions.. Crafted to work in conjunction with our trajectory and protrusion rods and tripod mount, it can be used to quickly and accurately determine the source and trajectory of bullets at a crime scene. It is co-aligned with its aluminum case, meaning that the laser won’t “wobble” when it is rotated. The BP-1’s innovative design places the on/off switch internal to the unit. Rather than use an external button which could be prone to breakage or failure, it is activated when a steel connector such as a trajectory rod is screwed into place at its base. The laser is powered by two AA batteries (included).
Co-aligned for consistent accuracy when conducting trajectory reconstructions
Red laser beam
Crafted to work with our trajectory and protrusion rods and tripod mount
bullet probe, trajectory rod, fiberglass rods, trajectory kit accessories, multi-colored forensic rods, photographic fog, 1006493, BP-1,
|
343.00 |
|
|
Photographic Fog
Used in conjunction with a trajectory laser, Photographic Fog helps to visualize the laser beam for photography. Simply spray Photographic Fog before taking a photograph. An extremely fine mist will linger in the air, making the entire beam of the laser visible and ready for photography.
Photographic Fog is a fine mist, it will not blur or obscure details in your photograph
Virtually invisible
fiberglass rods, 18" rods, multi-colored forensic rods, photographic fog, multi-color forensic rods, forensic rods, 1007386, MCR-K, MCR-1, 1007384, 1007393, MR-00C, 4-0748-K, 4-0748-1, 4-0748-00C, 4-0746-FOG, 4-0748, 1--774, PF-1
|
31.75 |
|
|
Bluestar® Forensic Mini Kit
Bluestar® Forensic Blood Detection is a New Reagent That Luminesces Bloodstains That Have Been Washed, Wiped Off, Altered, Diluted or That Are Otherwise Invisible to the Naked Eye
The mini kit is ideal for use in quick searches and small areas. It is ready to use with 2 125ml (4 oz) bottles of distilled water complete with vaporizer tops, and two pairs of Bluestar® Forensic tablets.
Blue Star, bluestar, blood detection, blood
|
53.20 |
|
|
Foxfury Rook R3B Forensic ALS Kit
Single wavelength blue and UV FLS Kit for general crime scene search.
The Rook R3A FLS kit comes with two forensic lights sources (a 470nm blue light and a 365nm UV light source) and a white flashlight. Lights feature a waterproof and anti-roll design, are accurate within 5nm and have a diffuser lens, which provides a smoother light distribution.
R3A Kit includes:
Application
Forensic
Case Depth
11in (280 mm)
Case Height
2.8in (70mm)
Case Width
13in (330 mm)
FLS
Y
Feature 2
Square non-roll head; Strike Bezel
Fire Resistant
Yes - meets NFPA 1971-2007 Fire Resistant Requirements: 500F / 260C
Kit
Y
LED Color
UV & blue & White
Light Type 1
Flashlight
Materials 1
Aluminum 6061-T6 hard anodized housing
Optional Accessories
Rechargeable 18650 Bbattery, Rechargeable 18650 Battery & Charger
Power Source 1
2x CR123 batteries
Power Source 2
Rechargeable 18650 battery
Recharge Time
External Charger
Rechargeable
Optional
Total Weight
2.9 lbs (1.3 kg)
Warranty
24 months
Wavelength
380nm, 395nm, 450nm, 470nm
What's Included
Rook MD1, Rook Blue, Rook UV, case, orange goggles, yellow goggles
Model: FF-940-R3B, foxfury, als, als kit, rook, alternate light source, light, uv, uv light
|
494.99 |
|