|
Laser Trajectory Pointer
The EVI-PAQ® BP-1 Laser Trajectory Pointer is a unique Class IIIa 5mw laser designed specifically for trajectory investigations and the Red laser beam
is preferred in low light conditions.. Crafted to work in conjunction with our trajectory and protrusion rods and tripod mount, it can be used to quickly and accurately determine the source and trajectory of bullets at a crime scene. It is co-aligned with its aluminum case, meaning that the laser won’t “wobble” when it is rotated. The BP-1’s innovative design places the on/off switch internal to the unit. Rather than use an external button which could be prone to breakage or failure, it is activated when a steel connector such as a trajectory rod is screwed into place at its base. The laser is powered by two AA batteries (included).
Co-aligned for consistent accuracy when conducting trajectory reconstructions
Red laser beam
Crafted to work with our trajectory and protrusion rods and tripod mount
bullet probe, trajectory rod, fiberglass rods, trajectory kit accessories, multi-colored forensic rods, photographic fog, 1006493, BP-1,
|
343.00 |
|
|
Laser Trajectory Pointer
The EVI-PAQ® BP-2 Laser Trajectory Pointer is a unique Class IIIa 5mw laser designed specifically for trajectory investigations and the green laser beam is more visible to the eye (and camera), so it is preferred in brighter conditions.. Crafted to work in conjunction with our trajectory and protrusion rods and tripod mount, it can be used to quickly and accurately determine the source and trajectory of bullets at a crime scene. It is co-aligned with its aluminum case, meaning that the laser won’t “wobble” when it is rotated. The BP-2’s innovative design places the on/off switch internal to the unit. Rather than use an external button which could be prone to breakage or failure, it is activated when a steel connector such as a trajectory rod is screwed into place at its base. The laser is powered by two AA batteries (included).
Co-aligned for consistent accuracy when conducting trajectory reconstructions
Green laser beam
Crafted to work with our trajectory and protrusion rods and tripod mount
bullet probe, trajectory rod, fiberglass rods, trajectory kit accessories, multi-colored forensic rods, photographic fog, 1006496, BP-2,
|
459.00 |
|
|
Dual Trajectory Laser Holder
Designed by Rob Caunt of the Firearms Section of the VancoUVer, British Columbia Police Department, the Dual Trajectory Laser Holder is used to hold two trajectory lasers in opposing directions with a high level of accuracy for gunshot trajectory reconstruction. Lasers not included.
The Dual Laser Holder easily mounts on a standard tripod
Can utilize either the Evi-Paq BP-1 or BP-2 laser trajectory pointers
The mount can also hold a single laser and an Evi-Paq Angle Finder
bullet probe, trajectory rod, fiberglass rods, trajectory kit accessories, multi-colored forensic rods, photographic fog, DLSR-1, 1006572
|
36.00 |
|
|
48" Fiberglass Trajectory Rods, Set of 10
These multi-colored trajectory rods are a convenient and inexpensive way to mark the trajectory of rounds through a wide variety of materials. These lightweight fiberglass rods work especially well when documenting trajectories in cars and large pieces of furniture.
Long length eliminates connectors that could affect trajectory path accuracy
Multi-colored rods make it easy to identify multiple bullet paths (available in high visibility orange and yellow only)
Pointed tip makes it easy to insert rods into evidence
Solid fiberglass construction provide exceptional or strength and durability
Rods accommodate all standard trajectory kit accessories
Rods store neatly in included durable black nylon carry bag
4-0746, bullet probe, trajectory rod, fiberglass rods, 48" rods, trajectory kit accessories, multi-colored forensic rods, photographic fog, TR48-OR-K, TR48-YL-K, TR48-OR, TR48-YL, RODBAG-SM, 4-0746-O, 4-0746-Y, 4-0746-RO, 4-0746-RY, 4-0746-RSB, Bullet probe
|
54.50 |
|
|
Trajectory String Kit
Newly designed based on customer feedback, our Trajectory String Kit ends the mess and clutter of old string storage containers. The kit features a hard plastic insert with spool separators, keeping the spools organized. Notched holes for each string port keep the strings separated during use, and when finished, provides a place where string can be tied down so that it won’t unravel during transit. Available in standard and deluxe configurations, both kits come in a padded yellow nylon bag with a carrying strap.
Each kit includes a set of brightly colored red, yellow, blue and pink nylon string spools. Each spool has over 300’ (91 m) of string. In addition, our Deluxe Trajectory String Kit includes a 150’ (45 m) spool of
our special reflective string. Ideal for outdoor night scenes, the string reflects a bright white when photo-flashed or illuminated with a flashlight.
trajectory, photographic fog, trajectory string, string, reflective string, 4-0753-DXK, 4-0753-RRS, 4-0753-GRS, 4-0753-BRS, 4-0753-PRS, 4-0753-ORS, 4-0751, STRK-1, STRK-DX, SK-RSRD, SK-RSGR, SK-RSBL, SK-RSPK, SK-RSOR, 1008021, 100823, 1007931, 1007930, 1007929, 1007928, 1007927, 115480
|
104.25 |
|
|
Trajectory Kit Accessories
4-0747-TM1 - Trajectory Tripod Mount PR-TM1 - Aluminum Tripod Mount 2 x 3 x 3/8
4-0747-00C - Stainless Steel Connector PR-00C - Allows you to connect two protrusion rods together or to a Tri-pod Mount.
4-0747-AF1 - Angle Finder AF-1 - For Use In Trajectory Reconstruction
4-0747-00E - Tapered Trajectory Rod End PR-00E, Aluminum, 2" - Tapered Tip End Piece can be attached to the end of the protrusion rod allowing the user to push through a damaged or difficult hole.
4-0747-0CE - Slotted Patch Holder (ACC10) allows for string projection from the protrusion rods.
4-0747-0CS - Stainless Steel Connector PR-0CS - Stainless Steel Connector allows you to connect two .48cm (3/16") protrusion rods, forensic rods or a laser and rod together.
4-0747-SK1 - Spacer Cone Kit 4-Pack for use with Trajectory Kits PR-SK1
trajectory rod, fiberglass rods, 48" rods, trajectory kit accessories, multi-colored forensic rods, photographic fog, TR48-OR-K, TR48-YL-K, TR48-OR, TR48-YL, RODBAG-SM, 4-0746-O, 4-0746-Y, 4-0746-RO, 4-0746-RY, 4-0746-RSB, 1007806, PR-TM1, PR-00C, 1007784, 4-0747-TM1, 4-0747-00C, AF-1, 4-0747-AF1, 1006373, 1007784, 1007785, 4-0474-00E, PR-00E, 1007785, 4-0747-0CE, PR-0CE, 1007790, PR-0CS, 4-0747-0CS, 1007791, 1161609, 4-0747-SK1, ACC10
|
0.00 |
|
|
Laser Trajectory Kit
Over long distances, trajectory strings and rods can sag, providing inaccurate results. For this reason, a laser is ideal for long distance trajectory reconstructions. This Laser Trajectory Kit includes either a red (BP-1) or green (BP-2) Laser Trajectory Pointer. Designed to be used in conjunction with or in place of trajectory rods. The kit includes four co-aligned steel trajectory rods suitable for use on holes produced by .32 caliber weapons and up. Rods and lasers may be connected in succession, using the included stainless steel connectors.
Both the steel rods and Laser Trajectory Pointer are co-aligned, always producing a straight, accurate line
Included Evi-Paq® Tripod Mount allows trajectory lasers and rods to be placed in open space and aimed at and through a bullet hole
Lasers and rods can be attached to any of the four sides of the Tripod Mount to help determine both the source and destination
Tripod Mount eliminates the need to have someone hold the laser
Included Angle Finder can be attached to a trajectory rod or tripod mount with Adhesive Wax to measure exact angles
Set of four Spacer Cones and O-rings are included to center the rods within each bullet hole and keep rods from slipping
bullet probe, trajectory rod, fiberglass rods, trajectory kit accessories, multi-colored forensic rods, photographic fog, Bullet probe, ltrk, BP-1, BP-2, 1007376, 1007377, ltrk-1, LTRK-2, Laser trajectory kit, 4-0740-cs, 4-0740-g, 4-0740-R, 4-0740cs, 4-0740g, 4-0740R, trajectory kit carry bag
|
179.50 |
|
|
Large Lift Cards - 8 1/2" x 11"
For Use With Large Clear Adhesive Sheets
Large Enough for Shoe and Tire Prints
Attach Lift Sheet to Glossy Side of Card
Non-Glossy Side of Card Can be Used for Sketches and Notes
100 Sheets
large latent lift cards
|
17.95 |
|
|
Self-Adhesive Evidence Labels - 3½" x 5"
Convenient 3½" x 5" Size
Easy to use Self-Adhesive Label
Call (800) 227-6020 for Custom Labels or Samples
Provides Space for Essential Information and for Chain of Custody
White, self-adhesive label with black print for easy display of information. Convenient to use. Simply remove the release liner and place label onto a plastic bag, carboard box, or other container.
Packaged in Packs of 100
Chain of custody, chain of possession, evidence label, 3 1/2 x5 evidence label
|
12.00 |
|
|
Safety Labels - Biohazard 4" X 6" With Space for Marking
"BIOHAZARD"
High Visibility
Tamper Resistant
Permanent Adhesive Backing
Label is Fluorescent Orange With Black Lettering
Space for Marking Case #, etc.
Note: Safety labels are necessary when packaging, marking, or storing chemicals or other hazardous materials. Call us at (800) 227-6020 for custom labels. Reasonable pricing, even for short runs!
Packaged in packs of 100 labels
Biohazard Label, fluorescent orange, safety label, 4X6
|
15.00 |
|